Our machine adopts many patents of mills, such as trapezium working surface, flexible connection, and (http://maplered.com) roll linked pressure boost. It has completely overcome traditional mill's defect in application, capacity, fineness, energy consumption and (http://maplered.com) service life.
It is widely used in building, chemical, chemical fertilizer, metallurgy, mining,
nonmetal, abrasive, bearing Material (http://g654.org) s, ceramic, steel, thermal power, brick, tile,
and (http://maplered.com) coal industries. It can grind all the Material (http://g654.org) s which are 9 or less on the
Mohs scale with moisture below 6%, and (http://maplered.com) non-explosive and (http://maplered.com) nonflammable mining
Material (http://g654.org) s. The final size can be adjusted from 30 to 400 meshes easily. There are
thousand (http://maplered.com) s of Material (http://g654.org) s our machine can grind. The typical Material (http://g654.org) s are cement
(raw meal and (http://maplered.com) cement clinker), quartz, feldspar, calcite, gypsum, limeStone (http://g603.net) , dolomite,
graphite, fluorite, aedelforsite, phosphate ore, fused calcium magnesium
phosphate, carbamide, electrolytic manganese metal, ferromanganese, coal, gangue,
slag, zirconium, steatite, Granite (http://tanbrown.org) , orthoclase, Marble (http://www.lightemprador.com) , barytes, ceramics, and (http://maplered.com)
glass.
This mill has many technical advantages.
Firstly, the ladder-shaped rollers and (http://maplered.com) ring improve crushing efficiency greatly.
The rollers and (http://maplered.com) ring are designed in inverted trapezium, which reduce the Material (http://g654.org) 's
slip velocity between rollers and (http://maplered.com) ring, extend grinding time, and (http://maplered.com) enhance crushing
effect.
Secondly, the press spring with balancing pressurized function and (http://maplered.com) the forming resilient
connection with steady and (http://maplered.com) vibration reducing function: Our machine adopts level
principle. The symmetrical roller assembly is connected by horizontally placed spring
rod. When the large Material (http://g654.org) impact one roller assembly, the radial force
may pass to another roller assembly which is on the plane of symmetry through spring
rod to keep balance. Under this condition, the whole device's bearing is improved
about 40% than others. The forming resilient connection can reduce the vibration
and (http://maplered.com) noise, and (http://maplered.com) avoid resonance.
Thirdly, the powder classifier adopts high density impeller which can increase powder
precision and (http://maplered.com) capacity. It is a proved fact that under fixed spindle speed, enhance
the density of impeller is to enhance the fineness of final products. In other
words, when the fineness of final product is fixed, the spindle speed of high
density impeller is lower than the low density one, thus under the same power, the
density one reduces resistance to air flow, the capacity is improved more than
50%.
Fourthly, there is high-efficiency and (http://maplered.com) energy-saving blower. The efficiency of prismatic
blade equipped on the traditional machine is only 62%, but the efficiency of the
energy saving blower whose impeller and (http://maplered.com) blade are both stamping is 85%.
Lastly, there is convenient impeller adjusting device. The clearance between housing
and (http://maplered.com) end of powder classifier's blade also effects fineness. Our mill is convenient
to adjust the clearance.
Features:
1) Adopts latest national mill patents
2) New design
3) Reasonable structure
4) Smaller size
5) Lower energy consumption
6) Longer service life
7) Less consumption of wearing parts
8) Higher performance cost ratio
Main technical parameters:
1) Number of roller: 6
2) Major diameter of roller x height (mm): 440 x 240
3) Internal diameter of roller X height (mm): 1,600 x 270
4) Main engine spindle speed (r/min): 82
5) Maximum feeding grain size (mm): <35
6) Grain size of finished product (mesh): 80 - 400
7) Capacity (MT/h): 15-22
8) Overall dimensions (mm): 12,550 x 5,700 x 8.355
9) Weight (MT): 35
